Leaks and urgent repairs
Burst and leaking pipes, dripping taps, running toilets, blocked sinks and drains, and low water pressure.
Plumbers in Bearsted
Tell us about the job and compare quotes from up to 3 vetted plumbers who cover Bearsted and Madginford.
- Reviews from real, invoiced jobs
- Vetted local trades
- Free for homeowners
Trades in Bearsted
We're onboarding plumbers in Bearsted. Post your job and we'll match you as soon as one is available.
Find a plumber in Bearsted
Bathrooms and fittings
Bathroom and shower room installations, new taps, toilets and basins, outside taps and appliance connections.
Hot water and heating pipework
Radiator replacements, power flushes, hot water cylinders and immersion heaters. Gas boiler work needs a Gas Safe registered engineer.
Bearsted sits about two miles east of Maidstone town centre, and while it's now part of the town's built-up area, its centre still looks like a village. Around The Green and Church Lane are some of the oldest homes in the borough, many of them timber-framed and dating from the 15th to 18th centuries. The historic core is covered by two conservation areas, and dozens of buildings are listed. If your home is listed, changes that affect its fabric, such as running a new soil pipe through an outside wall or moving a bathroom, may need listed building consent, so check with Maidstone Borough Council before work starts. Plumbing in old houses like these has usually been altered many times, so a good plumber will trace the runs before cutting in.
South of the A20, Madginford was mostly built in the 1960s, and many homes there have similar plumbing: original copper pipework, tank-fed hot water with a cold water tank in the loft, and stop taps that haven't been turned for years. Many owners are now swapping old cylinders and loft tanks for a combi boiler or an unvented cylinder, which is a plumbing and heating job, and a Gas Safe one if the boiler runs on gas.
Bearsted sits on the north bank of the River Len. If you live close to the river, ask your plumber about fitting non-return valves on drains, and keep outside gullies clear.
South East Water supplies Bearsted, and the water is hard. Limescale is behind many local plumbing calls: shower valves that stick, cartridge taps that drip, and cylinders and immersion heaters that slowly lose efficiency.
Common plumbing jobs in Bearsted include:
- Fixing dripping taps and replacing worn cartridges.
- Repairing leaks under sinks and baths, or behind the toilet.
- Replacing old cylinders and loft tanks.
- Clearing slow or backed-up drains.
- Emergency call-outs for burst or frozen pipes in winter.
When you get quotes, ask whether parts are included, how extra time is charged, and how long the work is guaranteed for. For anything involving your boiler or gas supply, use a Gas Safe registered engineer. Reviews on Trade Pilot are tied to real, invoiced jobs, so you can see what a plumber has done for other homeowners before you invite them round.
Typical prices
| Job | Typical UK range | Notes |
|---|---|---|
| Plumber, per hour | £45–£75 | Many plumbers have a one-hour minimum; day rates are around £325–£450 |
| Emergency call-out, out of hours | £100–£180 call-out, then £75–£150 an hour | Higher at night, weekends and bank holidays |
| Replace a kitchen or basin tap | £80–£200 | Includes a standard tap; more if the isolation valves need replacing |
| Repair a leak under a sink or a pipe | £75–£350 | Minor leaks are at the low end; access problems add time |
| Fix a running toilet | £65–£150 | Diaphragm or fill valve repairs are cheapest; a full syphon costs more |
| Fit an outside tap | £100–£200 | For a standard tap close to the supply; longer pipe runs cost more |
Typical UK ranges; your quotes depend on the job and access.
How it works
- 1
Tell us about the job
Check your Bearsted postcode and describe what you need. Photos help.
- 2
Get up to 3 quotes
Up to 3 vetted local trades who cover your part of Bearsted can quote.
- 3
Compare and choose
Read reviews from their real, invoiced jobs, compare the quotes, and choose who to invite round. Or choose no one.
How Trade Pilot helps you hire in Bearsted
Vetted local trades
We check every plumber before they can quote. For any gas work, always ask to see a Gas Safe ID card.
Reviews from real jobs
Reviews on Trade Pilot are tied to invoiced jobs, so you’re reading about work that was actually done and paid for.
Free, with no obligation
Posting a job and getting up to 3 quotes is free for homeowners. You choose who to invite round, or no one at all.
Frequently Asked Questions
Most plumbers charge between £45 and £75 an hour, often with a one-hour minimum. Fixed prices for small jobs, such as replacing a tap, are common. Prices in the South East tend to sit in the upper half of UK ranges.
Post your job on Trade Pilot with your postcode. Up to 3 vetted plumbers can quote, and reviews come from real, invoiced jobs. Ask for a written quote and check how extra time and parts are charged.
Repairs and like-for-like replacements usually don't. Changes that affect the building's fabric, such as new pipe runs through walls or moving a bathroom, may need listed building consent. Check with Maidstone Borough Council first.
Only if they're Gas Safe registered. Any work on a gas boiler must be done by a Gas Safe registered engineer, so check the Gas Safe ID card before work starts.
Turn off the water at the stop tap, switch off electrics near the leak if it's safe, open the cold taps to drain the system, and call a plumber. Our guide on burst pipes explains the first steps.
Trades choose the postcodes they cover. Enter your postcode when you post your job and we'll match you with plumbers who work in your area. If none covers it yet, we'll match you as soon as one does.
Yes. Posting a job and receiving quotes is free for homeowners, and you don't have to accept any quote.
Ready to Find Your Bearsted Plumber?
Get matched with vetted plumbers in Bearsted. Compare quotes and book today.
Get Started Now