Leaks and urgent repairs
Burst and leaking pipes, dripping taps, running toilets, blocked sinks and drains, and low water pressure.
Plumbers in Gillingham
Tell us about the job and compare quotes from up to 3 verified plumbers who cover Gillingham and Rainham.
- Reviews from real, invoiced jobs
- Vetted local trades
- Free for homeowners
Trades in Gillingham
We're onboarding plumbers in Gillingham. Post your job and we'll match you as soon as one is available.
Find a plumber in Gillingham
Bathrooms and fittings
Bathroom and shower room installations, new taps, toilets and basins, outside taps and appliance connections.
Hot water and heating pipework
Radiator replacements, power flushes, hot water cylinders and immersion heaters. Gas boiler work needs a Gas Safe registered engineer.
Gillingham grew quickly in the late Victorian and Edwardian years, as the dockyard and the railway brought work, and long streets of terraced houses still fill much of the town between the centre, Brompton and Gillingham Park. In houses that age, pipework has usually been altered many times, so a good plumber will trace the runs before cutting in. Homes built before about 1970 may still have a lead supply pipe between the stop tap and the street. Your plumber can tell you, and Southern Water can advise on replacing its section. Many terraces have been extended or split into flats, which can leave shared supply pipes and old drains serving more bathrooms than they were built for.
Rainham, part of Gillingham since 1929, grew again from the 1960s, when large estates such as Parkwood were built. Homes of that age often have original copper pipework, tank-fed hot water with a cold water tank in the loft, and stop taps that haven't been turned for years. Swapping the cylinder and loft tank for a combi boiler or an unvented cylinder is a common job when the boiler is replaced, and it's a Gas Safe job if the boiler runs on gas.
Southern Water supplies Gillingham, and the water is hard. Limescale is behind many local plumbing calls: shower valves that stick, cartridge taps that drip, and cylinders and immersion heaters that slowly lose efficiency.
Common plumbing jobs in Gillingham include:
- Fixing dripping taps and replacing worn cartridges.
- Repairing leaks under sinks and baths, or behind the toilet.
- Replacing running toilet cistern parts.
- Insulating or replacing cold water tanks in the loft.
- Emergency call-outs for burst or frozen pipes in winter.
When choosing a plumber, ask for a written quote that says whether parts are included and how extra time is charged. Check whether there's a call-out fee or a minimum charge, and how long the work is guaranteed for. For anything involving your boiler or gas supply, use a Gas Safe registered engineer. Reviews on Trade Pilot are tied to real, invoiced jobs, so you can see what a plumber has done for other homeowners before you invite them round.
Typical prices
| Job | Typical UK range | Notes |
|---|---|---|
| Plumber, per hour | £45–£75 | Many plumbers have a one-hour minimum; day rates are around £325–£450 |
| Emergency call-out, out of hours | £100–£180 call-out, then £75–£150 an hour | Higher at night, weekends and bank holidays |
| Replace a kitchen or basin tap | £80–£200 | Includes a standard tap; more if the isolation valves need replacing |
| Repair a leak under a sink or a pipe | £75–£350 | Minor leaks are at the low end; access problems add time |
| Fix a running toilet | £65–£150 | Diaphragm or fill valve repairs are cheapest; a full syphon costs more |
| Fit an outside tap | £100–£200 | For a standard tap close to the supply; longer pipe runs cost more |
Typical UK ranges; your quotes depend on the job and access.
How it works
- 1
Tell us about the job
Check your Gillingham postcode and describe what you need. Photos help.
- 2
Get up to 3 quotes
Up to 3 vetted local trades who cover your part of Gillingham can quote.
- 3
Compare and choose
Read reviews from their real, invoiced jobs, compare the quotes, and choose who to invite round. Or choose no one.
How Trade Pilot helps you hire in Gillingham
Vetted local trades
We check every plumber before they can quote. For any gas work, always ask to see a Gas Safe ID card.
Reviews from real jobs
Reviews on Trade Pilot are tied to invoiced jobs, so you’re reading about work that was actually done and paid for.
Free, with no obligation
Posting a job and getting up to 3 quotes is free for homeowners. You choose who to invite round, or no one at all.
Frequently Asked Questions
Most plumbers charge between £45 and £75 an hour, often with a one-hour minimum. Fixed prices for small jobs, such as replacing a tap, are common.
Post your job on Trade Pilot with your postcode. Up to 3 verified plumbers can quote, and reviews come from real, invoiced jobs. Ask for a written quote and check how extra time and parts are charged.
Not always. If it's sound, insulating the tank and its pipes may be enough. If you're replacing an old cylinder, a plumber can tell you whether a combi boiler or an unvented cylinder would let you remove the loft tank altogether.
Only if they're Gas Safe registered. Any work on a gas boiler must be done by a Gas Safe registered engineer, so check the Gas Safe ID card before work starts.
Turn off the water at the stop tap, switch off electrics near the leak if it's safe, open the cold taps to drain the system, and call a plumber. Our guide on burst pipes explains the first steps.
Trades choose the postcodes they cover. Enter your postcode when you post your job and we'll match you with plumbers who work in your area. If none covers it yet, we'll match you as soon as one does.
Yes. Posting a job and receiving quotes is free for homeowners, and you don't have to accept any quote.
Nearby areas
Ready to Find Your Gillingham Plumber?
Get matched with verified plumbers in Gillingham. Compare quotes and book today.
Get Started Now