Modern bathroom with twin basins on a wooden vanity and floor-to-ceiling glass doors onto a garden

Gas & Boiler Engineers in Earley

Tell us about the job and compare quotes from up to 3 vetted, Gas Safe registered engineers who cover Earley and Lower Earley.

Job type: Gas & Boiler Engineers
  • Reviews from real, invoiced jobs
  • Vetted local trades
  • Free for homeowners

Trades in Earley

We're onboarding gas engineers in Earley. Post your job and we'll match you as soon as one is available.

Find a gas engineer in Earley

Boiler repairs

No heating or hot water, error codes, low pressure, leaks and noisy boilers.

Servicing and safety checks

Annual boiler services, and landlord gas safety certificates for every gas appliance in a rented home.

New boilers and heating

Combi, system and regular boiler replacements, radiators, power flushes and magnetic filters.

Gas work is not a DIY job. By law, anyone working on your boiler, gas fire or hob must be on the Gas Safe Register. Before they start, ask to see their Gas Safe ID card and check the back to confirm they're qualified for your type of appliance.

Most of Earley's homes are in Lower Earley, which was built from the late 1970s through the 1980s. Many of those houses were built with a regular or system boiler and a hot water cylinder in the airing cupboard. Most have had a new boiler at least once since, but plenty still have the original pipework, radiators and cylinder. When the boiler is next replaced, it's a good time to ask whether a combi or a new cylinder suits the house better, and whether the system needs a flush first. Sludge from 40-year-old radiators can block a new boiler's pump and heat exchanger.

On closely spaced estates, flue position matters. A modern condensing boiler gives off a visible plume of vapour, and the rules on how close a flue can be to windows, doors and boundaries are strict. If the new boiler can't go where the old one was, your engineer may need a plume kit or a different flue route, which can add to the price.

The water here is hard, and limescale builds up fastest where water is heated. In a combi, that means the plate heat exchanger that makes your hot water. Check every new-boiler quote includes scale protection, a magnetic system filter and inhibitor.

The University of Reading's Whiteknights campus sits on Earley's edge, so many homes nearby are let to students and staff. Every rented home with gas needs a landlord gas safety check every 12 months, and the tenants must get a copy.

When comparing quotes, check the boiler make and model, the warranty and what keeps it valid, and what the flue work involves. Reviews on Trade Pilot come from real, invoiced jobs. If you smell gas, leave the property, turn off the gas at the meter if it's safe to do so, and call 0800 111 999.

Typical prices

JobTypical UK rangeNotes
Annual boiler service£80–£150Many warranties need a yearly service
Boiler repair, typical fault£150–£450A major part such as the PCB or heat exchanger can cost £400–£750
New combi boiler, like-for-like swap£2,200–£4,000Depends on the brand, flue changes, filter and warranty length
New system or regular boiler, like-for-like£2,500–£4,500A new cylinder is extra if needed
Landlord gas safety certificate£65–£110Add about £10–£15 for each extra appliance
Power flush£400–£800Depends on the number of radiators and the system's condition

Typical UK ranges; your quotes depend on the job and access.

How it works

  1. 1

    Tell us about the job

    Check your Earley postcode and describe what you need. Photos help.

  2. 2

    Get up to 3 quotes

    Up to 3 vetted local trades who cover your part of Earley can quote.

  3. 3

    Compare and choose

    Read reviews from their real, invoiced jobs, compare the quotes, and choose who to invite round. Or choose no one.

How Trade Pilot helps you hire in Earley

Vetted local trades

We check every engineer before they can quote. Always ask to see a Gas Safe ID card before work starts.

Reviews from real jobs

Reviews on Trade Pilot are tied to invoiced jobs, so you’re reading about work that was actually done and paid for.

Free, with no obligation

Posting a job and getting up to 3 quotes is free for homeowners. You choose who to invite round, or no one at all.

Frequently Asked Questions

A like-for-like combi swap usually costs £2,200 to £4,000 fitted. Converting a system with a cylinder to a combi, or moving the boiler, costs more, because of the extra pipework and flue work.

A combi suits homes with one bathroom and frees up the airing cupboard. If two showers are often used at once, a system boiler with a cylinder usually works better. Your engineer should size it to your home.

Condensing boilers give off a vapour plume, and flues must be kept a set distance from windows, doors and boundaries. On closely spaced homes, a plume kit redirects the vapour so the boiler can stay where it is.

Every 12 months, by a Gas Safe registered engineer. Give tenants a copy within 28 days of the check, or before they move in, and keep each record for at least two years.

Ask to see their Gas Safe ID card and check the back, which lists the types of gas work they're qualified to do. You can also check them on the Gas Safe Register website.

Trades choose the postcodes they cover. Enter your postcode when you post your job and we'll match you with engineers who work in your area. If none covers it yet, we'll match you as soon as one does.

Yes. Posting a job and receiving quotes is free for homeowners, and you don't have to accept any quote.

Ready to Find Your Earley Gas Engineer?

Get matched with vetted gas and boiler engineers in Earley. Compare quotes and book today.

Get Started Now